Our Latest News

FC Red Bull Salzburg Delivers FanTV Channel with Blackmagic Design

Fremont, CA - September 4, 2017 - Blackmagic Design has today announced that its range of URSA Mini digital film cameras is being used to produce match day content for FC Red Bull Salzburg, as part of a live OB solution designed around the ATEM 2 M/E Production Studio 4K switcher.

Mediahaus GmbH has been producing content on behalf of FC Red Bull Salzburg since 2005, and the core workflow has evolved from a small portable fly away system into a fully-fledged OB workflow with Blackmagic infrastructure products for acquisition, switching, distribution and monitoring at its very core.

Signal management on board Mediahaus’ Mercedes Sprinter van relies upon the Blackmagic Smart Videohub 40x40 router as well as a whole series of mini converters, also from Blackmagic Design.

“Taking into consideration the distances between camera positions and the OB, and the fact that we were relying on the stadium’s SDI network to bridge those different points, we also installed a Smart Videohub 16x16 matrix into the club’s central technical room. Doing so means we are now able to reclock all of the signals at the halfway point to ensure we don’t compromise signal integrity at any point in the entire chain,” reveals Wolfgang Angermüller, CEO and founder of Mediahaus GmbH.

Central to Mediahaus’ creative workflow is the ATEM 2 M/E Production Studio 4K switcher and accompanying ATEM 2 M/E Broadcast Panel. “We use the Blackmagic switcher to produce two primary feeds for the club. One for the stadium’s big screens and a separate feed for the club’s in-house television channel, FanTV,” explains Angermüller. “We also produce additional feeds for the club’s analytics team, the stadium’s LED boards and for live streaming purposes.”

In creating that content, Mediahaus relies on a clean PGM feed and the main camera signal supplied by the host broadcaster, according to Angermüller. “On top of that, we operate between four and five camera positions around the stadium ourselves, including two fixed positions in the players’ tunnel, another on the main gantry as well as a beauty shot under the stadium’s roof.”

Mediahaus’ URSA Mini 4K and URSA Mini Pro are rigged with the URSA Mini Shoulder Kit and a B4 mount and set to HD 1920x1080 in window mode, outputting a 1080i signal over SDI. Positioned on the main gantry, the URSA Mini Pro is equipped with the URSA Studio Viewfinder and a 16x Fujinon B4 HD lenses, while the URSA Mini 4K is set up pitch side with an 18x Fujinon zoom lens. Both are mounted on Sachtler tripods.”

“One of the biggest advantages to introducing the URSA Mini cameras into our workflow is the potential to control them remotely using the ATEM Software Control,” concludes Angermüller. “It represents a significant cost saving on our part as we don’t have to build expensive RCPs and CCUs and reduces the overall cost per camera channel by more than three quarters. Those savings are hard to ignore.”

Press Photography
Product photos of the Blackmagic MultiView 16, URSA Mini 4K, URSA Mini Pro, ATEM 2 M/E Production Studio 4k, ATEM 2 M/E Broadcast Panel, Smart Videohub 40x40, Smart Videohub 16x16, and all other Blackmagic Design products are available at  Story photos can be found here.

About Blackmagic Design
Blackmagic Design creates the world’s highest quality video editing products, digital film cameras, color correctors, video converters, video monitoring, routers, live production switchers, disk recorders, waveform monitors and real time film scanners for the feature film, post production and television broadcast industries. Blackmagic Design’s DeckLink capture cards launched a revolution in quality and affordability in post production, while the company’s Emmy™ award winning DaVinci color correction products have dominated the television and film industry since 1984. Blackmagic Design continues ground breaking innovations including 6G-SDI and 12G-SDI products and stereoscopic 3D and Ultra HD workflows. Founded by world leading post production editors and engineers, Blackmagic Design has offices in the USA, UK, Japan, Singapore and Australia. For more information, please go to

About New Magic Australia Pty Ltd (Australian and New Zealand Blackmagic Design master distributor)
New Magic Australia Pty Ltd is a recognised leader in the distribution and marketing of multimedia hardware and software, representing a carefully selected range of innovative, leading manufacturers and catering for both the professional and consumer markets. New Magic Australia established in 1993 is the Australian distributor of Blackmagic Design, Convergent Design, Hauppauge Computer Works Inc, Cubix and Matrox Video products.